Press Brake Technology Sheet Metal Bending

The Ultimate Guide to K-Factor, Bend Allowance, and Flat Pattern Unfolding

Understanding the Physics of Sheet Metal Bending

When forming sheet metal on a press brake, the material outside the neutral axis stretches under tension, while the material inside compresses. Because metal resists compression more than tension, the neutral axis shifts inward. The ratio of this neutral axis depth to the total material thickness is defined as the K-Factor.

How to Accurately Determine K-Factor

While standard rule-of-thumb K-factors (such as 0.40 for mild steel and 0.45 for stainless steel) work well for basic prototyping, precision manufacturing requires calibrating with a physical test coupon.

The Core Bend Allowance Formula

The arc length along the neutral axis through the bend angle is known as the Bend Allowance (BA):

BA = (pi / 180) * Angle * (Radius + K * Thickness)

Using this formula ensures your unfolded flat laser cut blanks assemble accurately without dimensional interference.

admin

Mechanical fabrication specialist and press brake tooling enthusiast.

Leave a Reply

Your email address will not be published. Required fields are marked *