Sheet Metal Bend Deduction Calculator
Calculate the exact Bend Deduction (BD), Outside Setback (OSSB), and Flat Blank Cut Length from external blueprint flange dimensions.
Deduction Results
- 1. Outside Setback (OSSB): OSSB = tan(45.0°) × (3 + 2) = 5.0000 mm
- 2. Bend Allowance (BA): BA = (π / 180) × 90 × (3 + 0.4 × 2) = 5.9690 mm
- 3. Bend Deduction (BD): BD = 2 × 5.0000 - 5.9690 = 4.0310 mm
- 4. Flat Blank Length: L_flat = 50 + 50 - 4.0310 = 95.9690 mm
BD = 2 × OSSB − BA • L_flat = L1 + L2 − BD
How to Use the Bend Deduction Calculator
Read Blueprint Flanges
Verify that your engineering drawing dimensions (L1 and L2) are measured to the outside apex (virtual sharp corner), which is standard on 95% of CAD prints.
Enter Material & Tooling
Select your alloy to auto-populate K-factor, then enter measured sheet thickness (T) and the inside bend radius (R) formed by your press brake die.
Calculate Deduction
Click Calculate to instantly compute Outside Setback (OSSB), Bend Allowance (BA), and the exact Bend Deduction (BD) with full derivation steps.
Cut Flat Laser Blank
Subtract the calculated Bend Deduction from the sum of outside flanges to obtain the final flat blank length (L_flat = L1 + L2 − BD) for CNC laser nesting.
Governing Formulas & Geometry
When a flat sheet is bent around a radius, material in the outer zone stretches while material in the inner zone compresses. If you simply sum the external blueprint flange dimensions, you will overestimate the blank size by the Bend Deduction (BD).
OSSB = tan(A / 2) × (R + T)BA = (π / 180) × A × (R + K × T)BD = 2 × OSSB − BAL_flat = L1 + L2 − BD
For a standard 90° bend, tan(45°) = 1, simplifying the Outside Setback equation to OSSB = R + T.
Worked Example & Shop Tips
Example Problem: A 90° bracket with L1 = 50 mm, L2 = 50 mm, T = 2.0 mm, R = 3.0 mm, and K = 0.40.
- OSSB:
tan(45°) × (3 + 2) = 5.00 mm - BA:
(π / 180) × 90 × (3 + 0.4 × 2) = 5.969 mm - BD:
(2 × 5.00) − 5.969 = 4.031 mm - Flat Blank:
50 + 50 − 4.031 = 95.969 mm
Frequently Asked Questions (FAQ)
Why do CNC programmers prefer Bend Deduction over Bend Allowance?
Bend Deduction directly uses the external dimensions specified on blueprint drawings. Programmers can simply add all outside flange lengths together and subtract the bend deductions, eliminating the tedious step of calculating straight tangent segments required by Bend Allowance.
What is the difference between Outside Setback (OSSB) and Bend Deduction (BD)?
Outside Setback is the physical distance from the virtual sharp corner (apex) to the tangent line where the curved bend radius begins. Bend Deduction is the total amount by which the sum of the two outside flange lengths exceeds the actual unfolded flat sheet length (BD = 2 × OSSB − BA).
Can I apply Bend Deduction to multi-bend parts?
Yes! For multiple bends in series, the total flat blank cut length is simply the sum of all outside blueprint flange lengths minus the sum of the individual bend deductions: L_flat = (F1 + F2 + ... + Fn) − (BD1 + BD2 + ... + BDn-1).