Sheet Metal Flat Pattern Calculator

Calculate the unfolded blank cut size for parts with multiple bends (brackets, U-channels, Z-profiles, and enclosures).

Flat Blank Results

Total Flat Blank Length (L_flat)
92.7965 mm
Sum of Outside Flanges 100.00 mm
Total Bend Deduction (Sum BD) 7.2035 mm
Total Bend Allowance (Sum BA) 8.7965 mm
2D Blank & 3D Formed Profile Multi-Bend
Bend 1 Bend 2 Total Flat Blank Length (L_flat) F1 F2 (Base) F3
Multi-Bend Principle: L_flat = (F1 + F2 + ... + Fn) − Σ(BD)

How to Calculate Multi-Bend Flat Blank Patterns

01

Select Bend Count

Choose from 1 to 4 bends. The input form dynamically generates flange length fields and per-bend radius inputs.

02

Input Flange Dimensions

Enter outside blueprint flange lengths directly from your CAD drawing from edge to outside apex mold lines.

03

Calculate Blank Length

Click Calculate to derive individual bend deductions and the total unfolded flat blank size with zero rounding error.

04

CNC Laser Nesting

Export the derived flat blank dimension into your CNC laser or turret punch nesting program for production cut-out.

Multi-Bend Geometry Formulation

For complex sheet metal parts with multiple sequential bends (U-channels, Z-profiles, hat sections), calculating individual straight tangent lines creates cumulative tolerance stack-up. The Bend Deduction method solves this cleanly:

General Multi-Bend Blank Equation:
L_flat = (F_1 + F_2 + ... + F_n) − Σ(BD_i)
Where F_i are outside mold flange lengths and BD_i is the bend deduction for each individual bend.

U-Channel Worked Example

Example U-Bracket: F1 = 25 mm, F2 = 50 mm, F3 = 25 mm, T = 2.0 mm, R = 2.0 mm, K = 0.40.

  • Sum of Flanges: 25 + 50 + 25 = 100.00 mm
  • Bend 1 Deduction (BD1): 3.602 mm
  • Bend 2 Deduction (BD2): 3.602 mm
  • Total BD: 3.602 + 3.602 = 7.204 mm
  • Unfolded Flat Blank: 100.00 − 7.204 = 92.796 mm
💡 Laser Etch Bend Lines: Program your CNC laser cutter to etch bend lines onto the sheet. Operators can line up backgauge finger stops instantly, verifying orientation before bending.

Frequently Asked Questions (FAQ)

How do I locate the bend lines on the unfolded blank?

The first bend line is located at: Bend Line 1 = F1 − OSSB1 + (BA1 / 2). The second bend line is located at: Bend Line 2 = Bend Line 1 + (BA1 / 2) + (F2 − OSSB1 − OSSB2) + (BA2 / 2).

Can different bends on the same part have different radii?

Yes. If different punch tooling is used for different stages, the calculator computes individual OSSB and BD values for each bend line independently.

Engineering Disclaimer: Calculated flat patterns assume ideal air bending geometry. In production, bend order sequence and machine crowning can influence final flange lengths. Prototype test blanks are recommended prior to large stamping runs.