Sheet Metal Thickness & Gauge Converter
Convert between Sheet Metal Gauge numbers, decimal millimeters, and decimal inches across Steel, Stainless, Galvanized, Aluminum, and Copper standards with exact ASTM/MSG tolerance specifications.
Conversion Results
How to Use the Thickness & Gauge Converter
Select Material Standard
Choose your alloy standard: Carbon Steel (MSG), Stainless (ASTM A480), Galvanized (A653), Aluminum (AWG), or Copper.
Choose Input Mode
Select from standard commercial gauge numbers, or enter decimal millimeters/inches to identify the closest gauge.
Convert Thickness
Click Convert to generate verified nominal thickness values in both decimal millimeters and thousandths of an inch.
Check Mill Tolerances
Measure incoming stock with a ball micrometer. Mill tolerances typically permit ±5% to ±10% variation from nominal gauge.
Why Gauge Differs By Material Standard
Gauge numbers originated in historic wire-drawing operations based on the weight of a square foot of material. Because stainless steel, carbon steel, and aluminum have different physical densities, their nominal thickness at identical gauge numbers varies considerably.
| Gauge # | Steel (MSG) | Stainless (A480) | Aluminum (AWG) |
|---|---|---|---|
| 10 GA | 0.1345" (3.42 mm) | 0.1406" (3.57 mm) | 0.1019" (2.59 mm) |
| 12 GA | 0.1046" (2.66 mm) | 0.1094" (2.78 mm) | 0.0808" (2.05 mm) |
| 14 GA | 0.0747" (1.90 mm) | 0.0781" (1.98 mm) | 0.0641" (1.63 mm) |
| 16 GA | 0.0598" (1.52 mm) | 0.0625" (1.59 mm) | 0.0508" (1.29 mm) |
| 18 GA | 0.0478" (1.21 mm) | 0.0500" (1.27 mm) | 0.0403" (1.02 mm) |
Drawing Standards & Caliper Tips
Frequently Asked Questions (FAQ)
Why is Galvanized sheet thicker than uncoated Mild Steel of the same gauge?
Galvanized steel gauge tables represent total finished thickness, which includes the zinc coating on both faces. A G90 coating adds approximately 0.0037" (0.094 mm) compared to bare cold-rolled steel.
How does material thickness variation affect press brake bending?
In air bending, tonnage scales with T² and springback scales with T³. A 10% thickness variation between sheets can cause a 2° to 3° angular deviation if CNC ram depth is uncompensated.