Sheet Metal Bend Deduction Calculator

Calculate the exact Bend Deduction (BD), Outside Setback (OSSB), and Flat Blank Cut Length from external blueprint flange dimensions.

Deduction Results

Bend Deduction (BD)
4.0310 mm
Flat Blank Length (L_flat) 95.9690 mm
Outside Setback (OSSB) 5.0000 mm
Bend Allowance (BA) 5.9690 mm
Blueprint Geometry DIN 6935
Virtual Apex L1 (Outside) L2 (Outside) OSSB R T
Formula Relationship: BD = 2 × OSSB − BA • L_flat = L1 + L2 − BD

How to Use the Bend Deduction Calculator

01

Read Blueprint Flanges

Verify that your engineering drawing dimensions (L1 and L2) are measured to the outside apex (virtual sharp corner), which is standard on 95% of CAD prints.

02

Enter Material & Tooling

Select your alloy to auto-populate K-factor, then enter measured sheet thickness (T) and the inside bend radius (R) formed by your press brake die.

03

Calculate Deduction

Click Calculate to instantly compute Outside Setback (OSSB), Bend Allowance (BA), and the exact Bend Deduction (BD) with full derivation steps.

04

Cut Flat Laser Blank

Subtract the calculated Bend Deduction from the sum of outside flanges to obtain the final flat blank length (L_flat = L1 + L2 − BD) for CNC laser nesting.

Governing Formulas & Geometry

When a flat sheet is bent around a radius, material in the outer zone stretches while material in the inner zone compresses. If you simply sum the external blueprint flange dimensions, you will overestimate the blank size by the Bend Deduction (BD).

Mathematical Equations:
OSSB = tan(A / 2) × (R + T)
BA = (π / 180) × A × (R + K × T)
BD = 2 × OSSB − BA
L_flat = L1 + L2 − BD

For a standard 90° bend, tan(45°) = 1, simplifying the Outside Setback equation to OSSB = R + T.

Worked Example & Shop Tips

Example Problem: A 90° bracket with L1 = 50 mm, L2 = 50 mm, T = 2.0 mm, R = 3.0 mm, and K = 0.40.

  • OSSB: tan(45°) × (3 + 2) = 5.00 mm
  • BA: (π / 180) × 90 × (3 + 0.4 × 2) = 5.969 mm
  • BD: (2 × 5.00) − 5.969 = 4.031 mm
  • Flat Blank: 50 + 50 − 4.031 = 95.969 mm
💡 Press Brake Backgauge Tip: To position CNC backgauge stops to the bend centerline on a 90° bend, set the stop distance to: Flange Length − OSSB + (BA / 2).
⚠️ Acute Bend Clearance: For acute bends (>90° rotation), ensure your press brake punch angle is sharper than the finished bend angle to prevent workpiece leg collision.

Frequently Asked Questions (FAQ)

Why do CNC programmers prefer Bend Deduction over Bend Allowance?

Bend Deduction directly uses the external dimensions specified on blueprint drawings. Programmers can simply add all outside flange lengths together and subtract the bend deductions, eliminating the tedious step of calculating straight tangent segments required by Bend Allowance.

What is the difference between Outside Setback (OSSB) and Bend Deduction (BD)?

Outside Setback is the physical distance from the virtual sharp corner (apex) to the tangent line where the curved bend radius begins. Bend Deduction is the total amount by which the sum of the two outside flange lengths exceeds the actual unfolded flat sheet length (BD = 2 × OSSB − BA).

Can I apply Bend Deduction to multi-bend parts?

Yes! For multiple bends in series, the total flat blank cut length is simply the sum of all outside blueprint flange lengths minus the sum of the individual bend deductions: L_flat = (F1 + F2 + ... + Fn) − (BD1 + BD2 + ... + BDn-1).

Engineering Disclaimer: Theoretical calculations are based on standard DIN 6935 empirical formulas. Real-world bend deductions can vary slightly due to material tensile strength variations across mill heat lots and machine deflection. Always bend a test coupon for aerospace or precision medical tolerances.